S-Tool Pro

S-Tool Pro — Samsung Specialist Servicing Tool

4 min read

What is S-Tool Pro?

S-Tool Pro is a Samsung-specialist servicing tool focused on providing deep Samsung Galaxy device operations. As a Samsung-only tool, it delivers targeted functionality optimized specifically for Samsung's Exynos and Qualcomm Snapdragon chipset variants.

Samsung-Specific Operations

Function	Technical Detail
FRP Bypass	Samsung-specific FRP removal via Download mode (Odin protocol), ADB sideload, combination firmware flash method. Covers One UI 1.0 through 6.x, all security patch levels
Network Unlock	Direct carrier lock removal for Samsung devices. Patches MSL (Master Subsidy Lock) data via Diag port (Qualcomm) or Download mode (Exynos). Works on US carriers: T-Mobile, AT&T, Verizon, Sprint, Cricket, MetroPCS, Boost
IMEI Repair	Samsung IMEI restoration via EFS partition write (Exynos devices) or NV item edit (Qualcomm Snapdragon devices). Fixes "Invalid IMEI", "No baseband version" errors
EFS Backup/Restore	Full EFS partition management — backup IMEI, WiFi MAC, BT MAC, carrier calibration, and security certificates before repair. Restore after flash
Knox Reset	Reset Samsung Knox warranty bit to 0x0. Clears "Custom" status in Settings > About Phone
Flash	Samsung firmware flash via Odin protocol — supports full flash (AP+BL+CP+CSC) and selective partition flash
Read Info	Read device details: model, IMEI, Knox status, FRP status, firmware version, carrier, hardware revision

Supported Samsung Models

Galaxy S Series: S24/S23/S22/S21/S20/S10 (all variants including Ultra/Plus/FE/Lite)
Galaxy A Series: A55 through A01 (all generations)
Galaxy M/F Series: M54-M01, F54-F04
Galaxy Note: Note 20/10/9/8
Galaxy Z: Fold5/4/3, Flip5/4/3
Galaxy Tab: Tab S9/S8/S7, Tab A9/A8/A7

Both Exynos and Qualcomm Snapdragon variants are supported for each model.

S-Tool Pro uses a credit-based system for pay-per-use operations.

View S-Tool Pro at Code-GSM

How to Use S-Tool Pro: Step-by-Step

Purchase S-Tool Pro credits from Code-GSM
Download, install, and log in
Connect Samsung device in Download Mode: Power off → hold Vol Down + connect USB cable
Read Info — confirms model, firmware version, security patch, lock status
Select operation: Network Unlock, FRP Remove, Flash Combination, IMEI Repair (EFS)
Execute

Tips

S-Tool Pro is Samsung-only — deep specialization means better support for newer Samsung security patches
For FRP bypass, the tool may auto-flash a combination firmware — this is expected behavior
Install Samsung USB drivers and ensure device is in Download Mode (not Recovery or Normal)
EFS backup is critical before IMEI operations — S-Tool Pro can read/write EFS partitions

Troubleshooting S-Tool Pro

Problem	Solution
Samsung not detected in Download Mode	Install Samsung USB Composite Device drivers (via Samsung Kies or Odin). Use a different USB port (rear USB 2.0 recommended). Try a different data cable
Unlock fails — "Lock Patch Error"	Confirm the firmware version is supported. Try flashing a Combination Firmware first, then retry the unlock
IMEI repair fails	Ensure EFS backup was made. For Qualcomm Samsung: connect via ADB Diag port first. For Exynos: use Download Mode
Knox won't reset	Knox reset requires the correct firmware. Flash stock firmware via Odin first before using Knox Reset function
FRP still active after bypass	Perform a factory reset via Settings → Backup & Reset. Then set up without any Google account to complete FRP removal

Frequently Asked Questions

Q: Does S-Tool Pro work on all Samsung regions?
A: Yes — it covers all carrier variants including US (AT&T, T-Mobile, Verizon, Sprint, Cricket), UK, Europe, Middle East, and APAC region Samsung devices.

Q: Is S-Tool Pro compatible with Samsung Galaxy fold/flip devices?
A: Yes — Samsung Z Fold and Z Flip series are supported for FRP, unlock, IMEI, and flash operations.

Q: What Samsung firmware should I flash for Combination?
A: Combination firmware is a factory test image for your specific model (e.g. G998BXXU3ASL1). Search "[model] combination firmware" on SamMobile or SamFirmware to find the correct file.

Q: Will using S-Tool Pro trip Samsung Knox?
A: FRP bypass via combination flash and unlock via MSL patch may trip Knox (warranty bit set to 0x1). S-Tool Pro's Knox Reset function can restore this to 0x0 on supported models.

Back to Knowledge Base