WorldlinkGSM KG Tool

WorldlinkGSM KG Tool — Official Distributor Services

7 min read

What is WorldlinkGSM KG Tool?

KG Tool by WorldlinkGSM is a Samsung-focused GSM tool specializing in KG (Knox Guard) bypass and Samsung carrier unlock operations. KG Tool addresses one of the most requested Samsung repair operations: removing Knox Guard (MDM) enrollment from carrier-sold or enterprise-managed Samsung devices.

What is Knox Guard (KG)?

Samsung Knox Guard (formerly known as Samsung KME/Knox Mobile Enrollment) is a device management feature that allows carriers and enterprises to:

Remotely lock or wipe devices
Enforce specific settings and restrictions
Display lock screens demanding payment (common with carrier financing programs)
Prevent factory reset from clearing the enrollment

When a Samsung device shows "This phone is locked by [carrier]" or "Samsung KG locked" after factory reset, it means Knox Guard is enrolled server-side. Standard FRP bypass does NOT fix this.

KG Tool Functions

Function	Detail
Knox Guard (KG) Bypass	Removes KG enrollment so device operates normally. Method varies by model and Android/One UI version
Samsung FRP Bypass	Google FRP removal for Samsung devices (Download mode + ADB methods)
Samsung Network Unlock	Carrier lock removal via direct patching (NV items via Diag/ADB) or server code
MDM Removal	Remove Mobile Device Management profiles (Knox, AirWatch, MobileIron, Intune)

Supported Samsung Models

Galaxy S series (S10-S24), A series (A10-A55), M series, F series, Note series, Z Fold/Flip series, Tab series. Coverage depends on chipset (Exynos vs Snapdragon) and Android/One UI version.

How to Use KG Tool: Step-by-Step

Purchase KG Tool credits from Code-GSM
Download and install the software
Log in
Connect Samsung device via USB — in normal boot or Download mode depending on the operation
Select operation: Knox Guard Bypass, Samsung FRP, Network Unlock, or MDM Remove
Execute — follow any on-screen prompts

Tutorial: Samsung Knox Guard (KG) Bypass

Ensure the phone is charged and powered on — KG bypass requires the phone to be in normal boot
Connect via USB and enable USB Debugging if possible
In KG Tool, select "KG Bypass" and the Samsung model
Click Execute — the tool communicates with the device to bypass the Knox Guard enrollment
Phone reboots — the "This phone is locked" KG message should be gone

Tips

KG bypass methods vary by One UI version and security patch — newer patches may not be supported yet
Knox Guard is different from Google FRP — they are separate locks and need separate bypass
Some methods may require connecting the phone to wifi during the process

Browse KG Tool at Code-GSM

Samsung Connection Modes — Quick Reference

Mode	How to Enter	Used For
Download Mode	Power off → Hold Vol Down + Bixby + Power simultaneously until Samsung logo appears, then Vol Up to confirm. Older models (pre-S8): Vol Down + Home + Power. Shows blue or green "Downloading" screen	Odin firmware flash, IMEI/EFS backup, FRP bypass (combination firmware), Knox operations. Required for most Samsung software operations
Recovery Mode	Power off → Hold Vol Up + Bixby + Power (or Vol Up + Power on newer models). Release when Samsung logo appears	Factory reset, ADB sideload, OTA updates, cache wipe. Useful for FRP via ADB sideload method
ADB Mode (Normal boot)	Settings → Developer Options → enable USB Debugging. Tap "Allow" on authorization dialog after connecting USB. Verify with `adb devices`	ADB sideload of FRP APKs, remote commands, data operations. Developer Options: tap Build Number 7 times in About Phone
Fastboot Mode	Available on Snapdragon Samsung models only (US carrier variants). Power off → Vol Down + Power to access bootloader. Or: `adb reboot bootloader`	Partition flash, bootloader unlock (if OEM unlock enabled), FRP partition erase
Diag Mode (9006)	Enable via ADB (`adb shell am start -a android.intent.action.VIEW -d "diag:..."`) or dedicated tools. Shows as Qualcomm Diag interface on Snapdragon Samsung	NV item read/write for IMEI repair and network unlock on Snapdragon Samsung

Troubleshooting Samsung Operations

Problem	Likely Cause	Solution
Samsung not detected in Download Mode	Samsung USB Driver not installed, USB cable quality, or wrong USB port	Install Samsung USB Driver for Mobile Phones (from Samsung official site or Samsung Kies/Smart Switch). Use a USB 2.0 port directly on the PC (not via hub). Accept the warning screen and press Vol Up to enter Download Mode properly
FRP bypass completed but Google account still required	Samsung devices have two FRP mechanisms: Google Account FRP AND Samsung Account FRP. Only one was removed	Perform a full FRP partition erase (both /frp and /efs FRP flag). For Knox Guard devices, Knox FRP is a third separate mechanism. Also ensure Google account sync is off before testing
Knox warranty counter tripped (0x1 shown)	Device was flashed with unofficial firmware, bootloader was unlocked, or unauthorized partition access occurred	Knox warranty bit is a hardware eFuse — once tripped to 0x1, it cannot be permanently reset. Some tools offer a temporary display reset but Samsung's server-side records remain
Odin flash fails with "FAIL (auth)" or "FAILED! setup connection"	BL (bootloader) not flashed first, wrong firmware for model/region, or binary mismatch	Flash BL partition first, then AP+CP+CSC. Verify firmware matches exact model (e.g. SM-A546B is different from SM-A546E). Use the correct HOME_CSC (not CSC) to preserve data during region change
Network lock remains after unlock operation	Server code calculated for wrong carrier, or Snapdragon model requires different method than Exynos	Verify the exact carrier the phone is locked to. Exynos Samsung: unlock via NV patching in Download mode. Snapdragon Samsung: use Diag mode NV item write or server unlock code. Some US carrier Samsung devices require MSL reset after permanent unlock
Knox Guard (KG) lock persists after FRP bypass	Knox Guard is a server-side MDM lock — completely separate from Google FRP	Knox Guard bypass requires a dedicated KG bypass tool — FRP removal does NOT fix Knox Guard. The device must be connected to the internet during KG bypass for the server deregistration to complete
EFS backup created but restore fails	EFS backup from Exynos model being restored to Snapdragon model (or vice versa), or partition size mismatch	EFS backups are model-specific. Only restore an EFS backup to the exact same model. Size differences will cause restore failure or EFS corruption
Credits deducted but operation returned technical error	Server processing issue or device disconnection	Do not disconnect during operation. Contact Code-GSM support with the error screenshot and order ID — credits may be reviewed for refund

Frequently Asked Questions — Samsung

Q: What is the difference between Google FRP and Samsung Account lock?
A: After a factory reset, Samsung devices may show two separate locks: (1) Google FRP — requires the previously synced Google account credentials; (2) Samsung Account lock — requires the Samsung/Galaxy account previously linked. Both must be removed. Knox Guard (MDM) is a third, separate server-side lock used by carriers.

Q: My Samsung is Exynos or Snapdragon — does it matter?
A: Yes, significantly. Exynos (European/Asia models) and Snapdragon (North American models) have different chipsets and different unlock/repair methods. IMEI repair: Exynos uses EFS partition; Snapdragon uses NV items via Diag. Network unlock: Exynos patched via Download mode; Snapdragon via NV/server code. Check your exact model number to determine the chipset.

Q: How do I find my Samsung model number?
A: Settings → About Phone → Model number. Or check the sticker on the back/under the battery (older models). The model number (e.g., SM-G998B) clearly identifies Exynos vs Snapdragon and region.

Q: Does unlocking void Samsung warranty?
A: Carrier unlock (removing network lock) does NOT void warranty in most countries — it is a contractual unlock. However, flashing unofficial firmware, unlocking the bootloader, or triggering the Knox warranty bit DOES void warranty.

Q: What is Samsung Download Mode used for vs Recovery Mode?
A: Download Mode (Vol Down + Bixby + Power) is used for firmware flashing via Odin and for most tool operations. Recovery Mode (Vol Up + Bixby + Power) is for factory reset, ADB sideload, and OTA updates — it does not allow Odin flash.

Q: My Samsung shows "DEVICE IS LOCKED. Contact [Carrier]" after reset — is this FRP or Knox Guard?
A: This message indicates Knox Guard (KG) — a carrier MDM enrollment. It is NOT standard Google FRP. Standard FRP shows the Google account sign-in screen. Knox Guard requires a dedicated KG bypass tool.

Back to Knowledge Base