Xiaomi King Tool

Xiaomi King Tool — Premium Xiaomi Servicing Platform

8 min read

What is Xiaomi King Tool?

Xiaomi King Tool is a comprehensive Xiaomi/Redmi/POCO repair platform with broad model coverage and deep chipset-level operations. The tool handles the full range of Xiaomi repair needs from simple FRP bypass to complex IMEI repair and Mi Account removal on the latest HyperOS devices.

Operations Matrix

Operation	MTK Devices	Qualcomm Devices
Mi Account Remove	BROM mode + DA auth bypass. Erases mi_account partition	EDL mode (9008) + signed firehose programmer
FRP Bypass	BROM partition erase, ADB, Fastboot	EDL/Fastboot/ADB methods
IMEI Repair	NVRAM read/write (direct BROM access to NVRAM partition)	QCN/NV items via Diag (9006) or EDL mode
Flash Firmware	Scatter file flash via BROM	Firehose flash via EDL, MiFlash via Fastboot
Unlock Bootloader	BROM-level bootloader flag set	Via authorized methods
Read Info	IMEI, serial, model, BROM version, EMMC/UFS CID	IMEI, serial, model, QCN backup, partition table

Chipset Coverage

MediaTek: MT6765/MT6768/MT6769 (Helio G35/G85/G80), MT6833/MT6853 (Dimensity 700/720), MT6877/MT6893/MT6895 (Dimensity 900-8100), MT6983/MT6985 (Dimensity 9000+)
Qualcomm: SM6115/SM6125 (Snapdragon 460/665), SM6225/SM6375 (Snapdragon 680/695), SM7150/SM7325 (Snapdragon 730/778G), SM8250/SM8350/SM8450/SM8550 (Snapdragon 865-8 Gen 2)

How to Use Xiaomi King Tool: Step-by-Step

Purchase credits from Code-GSM
Download, install, and log in
Identify device chipset: Check Settings → About Phone → Processor (MediaTek or Snapdragon)
For MTK Xiaomi: Power off → hold Vol Up → plug USB → software detects via BROM
For Qualcomm Xiaomi: Enter EDL (9008) via test point, ADB, or Fastboot command
Select operation: Mi Account Remove, FRP, IMEI Repair, Flash, Read Info
Execute

Tips

Xiaomi King Tool shows chipset-specific operations — MTK and QC devices have different available functions
IMEI repair method differs: NVRAM write for MTK vs NV items/QCN for Qualcomm
Always read device info first to confirm chipset and model detection

Browse Xiaomi King Tool at Code-GSM

Xiaomi / Redmi / POCO Connection Modes

Mode	How to Enter	Chipset	Used For
Fastboot Mode	Power off → hold Vol Down + Power together until Fastboot/Mi Bunny screen appears. Shows "FASTBOOT" or the Mi Bunny dead animation. Connect USB	All (MTK + QC)	Flash ROM, bootloader unlock, FRP erase (unlocked BL), Mi Account removal (some methods), reboot to other modes
MTK BROM Mode	Power off completely → hold Vol Up → plug in USB. If Vol Up doesn't work, try Vol Down. Phone shows as "MediaTek USB Port" (COM) in Device Manager. No screen display in BROM mode	MediaTek only	NVRAM read/write (IMEI repair), format userdata+frp, Mi Account partition erase, flash scatter file, DA auth bypass for locked BROM
Qualcomm EDL (9008)	Options: (1) `adb reboot edl` from ADB; (2) `fastboot oem edl` from Fastboot; (3) Hardware test point (short two test pads on PCB while connecting USB). Shows as "QHSUSB_DLOAD" on COM port in Device Manager	Qualcomm only	Firehose flash (full ROM), NV backup/restore (IMEI), Mi Account partition erase, dead-boot recovery
Recovery Mode	Power off → hold Vol Up + Power until Mi Recovery screen appears	All	Factory reset, ADB sideload, clear cache. Note: Mi Recovery will not allow sideload without unlocked bootloader
ADB Mode	Settings → Additional Settings → Developer Options → USB Debugging. Connect USB → Allow on phone	All (normal boot)	Remote commands, FRP bypass via ADB sideload, trigger reboot to Fastboot/EDL

Anti-Rollback (ARB) Protection — Critical for Xiaomi

Xiaomi devices implement an Anti-Rollback (ARB) counter burned into the chipset's eFuse storage. Each firmware version has an ARB index. Flashing firmware with a lower ARB index than the current burned index will permanently brick the device — this cannot be repaired by any tool.

Always verify that the target firmware's ARB index is equal to or higher than the current device ARB before flashing
Xiaomi Flasher Pro and most modern Xiaomi tools check ARB automatically and warn before proceeding
A device bricked by ARB violation cannot be recovered — it is a hardware-level permanent lock

Troubleshooting Xiaomi / Redmi / POCO Operations

Problem	Likely Cause	Solution
Mi Account lock persists after bypass	Mi Account partition was not fully erased, or MIUI/HyperOS re-applies the lock from a backup on first boot	(1) Do not connect to WiFi after the operation until you have fully set up the device; (2) Perform a full factory reset including userdata AND the mi_account partition; (3) For HyperOS: some methods require EDL firehose with a specific programmer that supports the HyperOS partition layout. Update the tool to latest version
MTK Xiaomi not detected in BROM mode	MTK VCOM driver not installed, phone has DA authentication (newer MTK SoCs), or Vol key held too late	Install MTK VCOM drivers. For newer MTK SoCs (MT6833/MT6853/MT6877+) with DA auth: the tool requires a bypass DA file. Check if the tool version supports your specific SoC. Hold Vol key BEFORE connecting USB, not after
Qualcomm Xiaomi not entering EDL (9008)	Fastboot restrictions, ADB not authorized, or EDL command blocked by security	(1) Try `adb reboot edl` first; (2) Try `fastboot oem edl`; (3) Use hardware test point — short specific pads on the PCB while connecting USB. Test point locations are model-specific (search "[model] edl test point"). Phone in EDL shows "QHSUSB_DLOAD" in Device Manager
Flash fails with "ARB Update" or "Anti-Rollback" warning	Target firmware has lower ARB index than device	STOP — do NOT proceed. Flashing will permanently brick the device. Find firmware with an equal or higher ARB index. Use the current or newer firmware only
Bootloader unlock fails / "BL unlock not allowed"	Unofficial unlock: needs Mi account with 72-hour unlock waiting period. System app hasn't marked device eligible	Log into Mi account, apply for unlock at unlock.update.miui.com, wait 72h or 168h (7 days for newer models). Use MiFlash Unlock official tool. Some HyperOS devices require additional waiting
Phone boots to MIUI/HyperOS logo loop after flash	Fastboot ROM flashed on locked bootloader, missing partitions, or incomplete flash	Use EDL or BROM mode to flash the FULL ROM (not just Fastboot-only partitions). Ensure all partitions (boot, system, vendor, userdata) were included. For BROM: use scatter file with all partitions selected
IMEI shows baseband unknown / null after NVRAM repair	NVRAM write incomplete — both IMEI1 and IMEI2 must be written, not just IMEI1	Retry: write IMEI1 AND IMEI2 in BROM mode (MTK) or NV items 550 AND 551 in Diag mode (QC). Flash the modem/baseband partition if IMEI still shows null after write attempt
FRP removed but setup wizard still shows Google account screen	Userdata FRP flag was cleared but the dedicated frp partition was not erased	Erase the frp partition specifically (not just factory reset). In Fastboot: `fastboot erase frp`. In BROM: select format frp partition. Disconnect WiFi before testing the result

Frequently Asked Questions — Xiaomi / Redmi / POCO

Q: What is the difference between Mi Account removal and FRP bypass?
A: Mi Account is Xiaomi's own cloud-based device lock — it activates after factory reset and requires the original Xiaomi/Mi credentials. Google FRP is Android's Google account lock — also activates after factory reset but requires a Google account. Xiaomi devices can have BOTH locks simultaneously. Both must be removed separately.

Q: My Xiaomi is MTK or Qualcomm — how do I find out?
A: Settings → About Phone → Processor (or CPU). MediaTek shows "Helio" or "Dimensity." Qualcomm shows "Snapdragon." Generally: Redmi Note (base), Redmi A/C series, POCO M/C = MTK. Xiaomi Mi/POCO F/X series, Redmi Note Pro/K series = Qualcomm. The chipset determines which mode (BROM vs EDL) and which IMEI method to use.

Q: Will bootloader unlock remove all my data?
A: Yes — official Xiaomi bootloader unlock via Mi Unlock Tool performs a full data wipe. This is by design. Back up all data before proceeding. Third-party BROM/EDL bypass methods may or may not wipe data depending on the method.

Q: What is MIUI vs HyperOS? Does it change repair procedures?
A: MIUI is Xiaomi's older Android skin (up to MIUI 14). HyperOS is the replacement introduced in late 2023 for Xiaomi 14 series and newer flagships. HyperOS changed some partition layouts and added stricter security. Some older bypass methods no longer work on HyperOS — always verify tool support for HyperOS before ordering.

Q: Can a device bricked by Anti-Rollback be recovered?
A: No — ARB violation burns a permanent eFuse flag. The device will not boot and cannot be recovered by any software or hardware method. This is why respecting ARB warnings before flashing is critical.

Q: After Mi Account removal, the phone asks for Mi Account again on first boot — why?
A: This usually happens if the phone connected to WiFi during or after the bypass and downloaded account data again. Do not connect to WiFi immediately after Mi Account removal. Set up the device offline first, then connect to WiFi after completing the full initial setup.

Q: How do I check credits and order history?
A: Log in to code-gsm.com. Your credit balance and order history are visible in your account dashboard.

Back to Knowledge Base